Step 1: Preparing the Area Goal: Create a solid base for your synthetic turf 

Begin by excavating the designated area to a depth of 100mm below any adjacent surfaces, such as a concrete footpath.

A useful tip is to calculate the soil volume to be removed at approximately 1 cubic meter per 10 square meters of surface; for example, a 50 square meter area will necessitate the removal of about 5 cubic meters of soil, for which a 5 cubic meter skip bin would be ideal. Once the excavation is complete, you will have a 100mm deep base ready to receive the next layer of crushed rock, ensuring stability and effective drainage for your turf.

Step 2: Laying the Crushed Rock Base

Goal: Provide stability and improve drainage 

To achieve this, begin by filling the previously excavated space with a mix of 20mm crushed rock and stone dust, layering 70mm of crushed rock followed by a 30mm layer of stone dust. An important tip to ensure effectiveness is to evenly spread the crushed rock, then lightly hose it down and thoroughly compact it. Should you notice any uneven dips during this process, simply add more crushed rock to these areas and compact again until the surface is level. This structured approach will lay a strong, well-drained foundation for whatever comes next.

Step 3: Adding the Stone Dust Layer

Goal: Create a stable surface.

How-To: Spread a 30mm layer of stone dust over the crushed rock, keeping it below the lowest edge. Hose down and compact the stone dust until it's solid.

Tip: Ensure the final layer is 10-20mm below the edge.

Step 4: Installing the Artificial Turf

Goal: Position the synthetic grass correctly.

To ensure your synthetic turf is installed correctly, start by positioning the turf roll along the straightest edge of the area. Trim the flaps on both sides of the roll close to the first stitch to prevent any overlapping or bulging. Once the turf is properly laid out, secure it by aligning the grass along the edges and fixing it into place using synthetic turf nails or U-pins. It's essential to place these nails or pins about 2-3cm from the edge and space them 20-30cm apart to maintain even and secure coverage. This method will help keep the turf neatly aligned and firmly attached, ensuring a professional-looking finish.

Tip: Trim any excess grass to fit perfectly. If joining rolls, use joining tape (see the section below).

Additional Tip: Joining Multiple Pieces of Turf

Create Seamless Joins

To create seamless joins in your synthetic turf, start by trimming the edges of the turf to ensure they are clean and even. Gently brush these edges to remove any debris that might prevent a smooth join. Next, place joining tape directly beneath the edges you're working on. Carefully align the first piece of turf with the tape and press down firmly to ensure it adheres well, checking that the fit is tight with no gaps. Repeat this process with the second piece of turf, taking extra care to align it precisely with the first, to ensure the seam is virtually invisible. This attention to detail will result in a more professional and aesthetically pleasing finish.

Installation: Your Step-by-Step Guide to Laying Artificial Turf

Transforming your outdoor space with artificial turf can be a smooth and rewarding project when you follow these straightforward steps.

Here’s a simple guide to ensure a flawless installation:

Step 5: Brushing and Sanding

Goal: Ensure the turf stands upright.

To maintain the optimal appearance and functionality of your synthetic turf, start by using a power broom to brush the blades backwards, lifting them to an upright position. Following this, evenly distribute kiln-dried sand across the surface of the turf. Once the sand is spread, go over the area again with the power broom. This second brushing helps to integrate the sand into the base of the turf, ensuring it settles properly between the blades. This process not only enhances the turf's durability and aesthetic but also supports the stability of each blade, keeping your turf looking lush and natural.

Tip: If you have pets, consider Premium Pet Infill instead of sand, as it helps with odor control. For existing odor issues, use a Liquid Pet Deodorizer before installation.

Step 6: Enjoy Your New Lawn!

Goal: Maintain the appearance of your new turf.

To keep your artificial lawn looking fresh and upright, it is advisable to occasionally brush the grass. By following these simple steps, you will maintain a beautiful, low-maintenance artificial lawn that is immediately ready for enjoyment. Revel in your new space and appreciate the time you save on traditional lawn care, allowing you more leisure to enjoy the outdoor area you have created.

Oasis Green Synthetic Grass

2 Tone Green Synthetic Golf Grass

For a quote contact us, 

Email: sales@toolmarket.com.au

Phone: 03 9996 9022 or 0466 231 113